imacc logo

rules and regulationscfr



With appropriate planning IMACC is offering qualified customers and emptiers Shop Floor Hazardous Waste Generator Training assistance (an annual requirement for large quantity generators) and DOT Hazmat Training assistance (required every three years).  These programs are described below.


RCRA Hazardous Waste Generator Regulations

40 CFR § 265.16: Personnel training  (Large Quantity Generator)

(a)(1) Facility personnel must successfully complete a program of classroom instruction or on- the-job training that teaches them to perform their duties in a way that ensures the facility’s compliance with the requirements of this part. The owner or operator must ensure that this program includes all the elements described in the document required under paragraph (d)(3) of this section.

(2) This program must be directed by a person trained in hazardous waste management procedures, and must include instruction which teaches facility personnel hazardous waste management procedures (including contingency plan implementation) relevant to the positions in which they are employed.

(3) At a minimum, the training program must be designed to ensure that facility personnel are able to respond effectively to emergencies by familiarizing them with emergency procedures, emergency equipment, and emergency systems, including where applicable:

(i) Procedures for using, inspecting, repairing, and replacing facility emergency and monitoring equipment;
(ii) Key parameters for automatic waste feed cut-off systems; (iii) Communications or alarm systems;
(iv) Response to fires or explosions;
(v) Response to ground-water contamination incidents; and
(vi) Shutdown of operations.

continued ...

Please follow the link on this page for complete requirements and Personnel Training  requirements for Small (SQG) and Large Quantity Generators (LQG).

DOT Training Requirements

Code of Federal Regulations
Title 49, Subpart H, §172.700-172.704

Training Must Include:

  • General awareness/familiarization
  • Function-specific training
  • Safety
  • Security awareness
  • In-depth security training, if a security plans is required
  • Driver training (for each hazmat employee who will operate a motor vehicle)

Links


RIPA                

Online Scheduler      

IMACC SharePoint



49 CFR - DOT

Hazardous Material Regulations         

Qualification and Maintenance of IBCs

IBC Regulations      

Closure Instructions

Training


Locations

IMACC Corporation
2303 Dalton Industrial Ct
Dalton, GA 30721-4901
   706.270.8635 Ph
   706.259.8071 Fax

IMACC Corporation
1236 Industrial Ave
Suite 101
Gastonia, NC  28054
   704.874.1210 Ph
   704-874.1208 Fax

IMACC Corporation
1435 W. Church St
Jacksonville, FL  32204
   904.233.6693 Ph
   706.259.8071 Fax

IMACC Corporation
7835 National Turnpike   Suite 100
Louisville, KY.  40214
  502.314.6856 Ph
  502.368.0130 Fax

Map Directions 
   Dalton
  
Gastonia
  
Jacksonville
   Louisville

Customer Service: (866) 202-1973

© 2011 IMACC Recycling Solutions  - All Rights Reserved